AIR - Automated Image and Restore 2.0 su Snow Leopard

[peppespe]

Sto cercando di installare l'applicativo AIR - Automated Image and Restore 2.0, ma ho dei problemi con alcuni pacchetti che non vengono trovati:

MacBook-di-peppespe:bin giuseppespecchio$ ls
air-2.0.0	dc3dd
MacBook-di-peppespe:bin giuseppespecchio$ cd a*
MacBook-di-peppespe:air-2.0.0 giuseppespecchio$ ls
COPYING			README			install-air-2.0.0
MacBook-di-peppespe:air-2.0.0 giuseppespecchio$ chmod +x install-air-2.0.0
MacBook-di-peppespe:air-2.0.0 giuseppespecchio$ sudo ./install-air-2.0.0
cat: /proc/cpuinfo: No such file or directory
./install-air-2.0.0: line 35: free: command not found

Automated Image & Restore (AIR) Auto-installer 2.0.0
----------------------------------------------------

This program will install files on your system that are
necessary to run AIR (Automated Image & Restore).

Perl/Tk is not installed on your system or you have a version
(0) other than what is called for, so for the installation
to proceed, it will have to be downloaded from the CPAN site on
the Internet.  This means your system must be connected to a
network with Internet access and properly configured.  If you
can surf the web then you should be okay.

Once Perl/Tk is downloaded, it will automatically be compiled
and installed.

If you are ready to proceed with the installation/upgrade,
press ENTER.

To cancel, hit Control-C.

Attempting to get the latest version of Perl/Tk...
./install-air-2.0.0: line 2668: /bin/gunzip: No such file or directory
./install-air-2.0.0: line 2672: /tmp/snarf: No such file or directory
Download of Tk-804.028_502.tar.gz failed...

If the failure message indicates that there are too many
connections, it just means that there are too many other
people downloading stuff from the CPAN site.  You'll
just have to keep trying every few minutes or so until
you get through.

If the installer failed with some other error message,
please email steve@unixgurus.com for assistance. Be sure
to send the air-install.log which should be found in /tmp.

Dal messaggio desumo che manca il pacchetto Tk-804.028_502.tar.gz, il quale ho provveduto a scaricare ed installare direttamente, , come da stralcio sotto riportato:

MacBook-di-peppespe:Tk-804.028_502 giuseppespecchio$ perl Makefile.PL XFT=1
perl is installed in /System/Library/Perl/5.10.0/darwin-thread-multi-2level okay
PPM for perl5.010000
Test Compiling config/perlrx.c
Test Compiling config/pmop.c
Test Compiling config/pregcomp2.c
Test Compiling config/regexp511.c
Test Compiling config/signedchar.c
Test Compiling config/Ksprintf.c
Test Compiling config/svtrv.c
Test Compiling config/tod.c
Generic gettimeofday()
Using -L/usr/X11R6/lib to find /usr/X11R6/lib/libX11.dylib
Using -I/usr/X11R6/include to find /usr/X11R6/include/X11/Xlib.h
Cannot find freetype.h include file
Writing Tk/Config.pm
Writing pTk/tkConfig.h
WARNING: DISTVNAME is not a known parameter.
Checking if your kit is complete...
Looks good
'DISTVNAME' is not a known MakeMaker parameter name.
'XFT' is not a known MakeMaker parameter name.
Generating Dependencies for darwin, win_arch=x
Test Compiling config/Hstrtoul.c
Test Compiling config/Hstrdup.c
Test Compiling config/Hstrcasecmp.c
Extracting ClientWin.c
Extracting default.h
Extracting exWinHandle.c
Extracting img.h
Extracting imgBMP.c

<...Omissis...>

Writing Makefile for Tk::Event
Finding dependencies for Entry.xs
Writing Makefile for Tk::Entry
Skip Win32Site on x
Writing Makefile for Tk::DragDrop
Finding dependencies for Compound.xs
Writing Makefile for Tk::Compound
Finding dependencies for Canvas.xs
Writing Makefile for Tk::Canvas
Finding dependencies for Tk.xs
Finding dependencies for chnGlue.c
Finding dependencies for encGlue.c
Finding dependencies for evtGlue.c
Finding dependencies for objGlue.c
Finding dependencies for tixGlue.c
Finding dependencies for tkGlue.c
Finding dependencies for tkGlue_f.c
Finding dependencies for tkWin32Dll.c
Tests in PNG
Tests in JPEG
Tests in Event
Writing Makefile for Tk

ma ho sempre lo stesso risultato:

MacBook-di-peppespe:Tk-804.028_502 giuseppespecchio$ cd /usr/local/bin
MacBook-di-peppespe:bin giuseppespecchio$ ls
air-2.0.0	dc3dd
MacBook-di-peppespe:bin giuseppespecchio$ cd air*
MacBook-di-peppespe:air-2.0.0 giuseppespecchio$ ls
COPYING			README			install-air-2.0.0
MacBook-di-peppespe:air-2.0.0 giuseppespecchio$ sudo ./install-air-2.0.0
Password:
- Nascondi testo citato -
cat: /proc/cpuinfo: No such file or directory
./install-air-2.0.0: line 35: free: command not found

Automated Image & Restore (AIR) Auto-installer 2.0.0
----------------------------------------------------

This program will install files on your system that are
necessary to run AIR (Automated Image & Restore).

Perl/Tk is not installed on your system or you have a version
(0) other than what is called for, so for the installation
to proceed, it will have to be downloaded from the CPAN site on
the Internet.  This means your system must be connected to a
network with Internet access and properly configured.  If you
can surf the web then you should be okay.

Once Perl/Tk is downloaded, it will automatically be compiled
and installed.

If you are ready to proceed with the installation/upgrade,
press ENTER.

To cancel, hit Control-C.

Attempting to get the latest version of Perl/Tk...
./install-air-2.0.0: line 2668: /bin/gunzip: No such file or directory
./install-air-2.0.0: line 2672: /tmp/snarf: No such file or directory
Download of Tk-804.028_502.tar.gz failed...

If the failure message indicates that there are too many
connections, it just means that there are too many other
people downloading stuff from the CPAN site.  You'll
just have to keep trying every few minutes or so until
you get through.

If the installer failed with some other error message,
please email steve@unixgurus.com for assistance. Be sure
to send the air-install.log which should be found in /tmp.

[alb3!]

l'installer ha un problema nello scaricarlo, non nell'installarlo...

nel file /tmp/air-install.log cosa c'è ?

[peppespe]

Ecco il contenuto di air-install.log:

Install Log for AIR Version 2.0.0
Mar 13 Apr 2010 11:51:59 CEST
PERLTK_VER=804.028_502
TEMP_DIR=/tmp
INSTALL_DIR=/usr/local
FINAL_INSTALL_DIR=/usr/local
checking for uudecode:
/usr/bin/uudecode
perl is located at:
/usr/bin/perl
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
 Platform:
   osname=darwin, osvers=10.0, archname=darwin-thread-multi-2level
   uname='darwin b66.apple.com 10.0 darwin kernel version 10.0.0d8: tue may 5 19:29:59 pdt 2009; root:xnu-1437.2~2release_i386 i386 '
   config_args='-ds -e -Dprefix=/usr -Dccflags=-g  -pipe  -Dldflags= -Dman3ext=3pm -Duseithreads -Duseshrplib -Dinc_version_list=none -Dcc=gcc-4.2'
   hint=recommended, useposix=true, d_sigaction=define
   useithreads=define, usemultiplicity=define
   useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
   use64bitint=define, use64bitall=define, uselongdouble=undef
   usemymalloc=n, bincompat5005=undef
 Compiler:
   cc='gcc-4.2', ccflags ='-arch x86_64 -arch i386 -arch ppc -g -pipe -fno-common -DPERL_DARWIN -fno-strict-aliasing -I/usr/local/include',
   optimize='-Os',
   cppflags='-g -pipe -fno-common -DPERL_DARWIN -fno-strict-aliasing -I/usr/local/include'
   ccversion='', gccversion='4.2.1 (Apple Inc. build 5646)', gccosandvers=''
   intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
   d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
   ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
   alignbytes=8, prototype=define
 Linker and Libraries:
   ld='gcc-4.2 -mmacosx-version-min=10.6', ldflags ='-arch x86_64 -arch i386 -arch ppc -L/usr/local/lib'
   libpth=/usr/local/lib /usr/lib
   libs=-ldbm -ldl -lm -lutil -lc
   perllibs=-ldl -lm -lutil -lc
   libc=/usr/lib/libc.dylib, so=dylib, useshrplib=true, libperl=libperl.dylib
   gnulibc_version=''
 Dynamic Linking:
   dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
   cccdlflags=' ', lddlflags='-arch x86_64 -arch i386 -arch ppc -bundle -undefined dynamic_lookup -L/usr/local/lib'


Characteristics of this binary (from libperl): 
 Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV
                       PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP USE_64_BIT_ALL
                       USE_64_BIT_INT USE_ITHREADS USE_LARGE_FILES
                       USE_PERLIO USE_REENTRANT_API
 Locally applied patches:
/Library/Perl/Updates/<version> comes before system perl directories
installprivlib and installarchlib points to the Updates directory
 Built under darwin
 Compiled at Jul  9 2009 15:07:54
 @INC:
   /Library/Perl/Updates/5.10.0
   /System/Library/Perl/5.10.0/darwin-thread-multi-2level
   /System/Library/Perl/5.10.0
   /Library/Perl/5.10.0/darwin-thread-multi-2level
   /Library/Perl/5.10.0
   /Network/Library/Perl/5.10.0/darwin-thread-multi-2level
   /Network/Library/Perl/5.10.0
   /Network/Library/Perl
   /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level
   /System/Library/Perl/Extras/5.10.0
   .
Automated Image & Restore (AIR) Auto-installer 2.0.0
----------------------------------------------------
Testing for perl:
Can't locate Tk.pm in @INC (@INC contains: /Library/Perl/Updates/5.10.0 /System/Library/Perl/5.10.0/darwin-thread-multi-2level /System/Library/Perl/5.10.0 /Library/Perl/5.10.0/darwin-thread-multi-2level /Library/Perl/5.10.0 /Network/Library/Perl/5.10.0/darwin-thread-multi-2level /Network/Library/Perl/5.10.0 /Network/Library/Perl /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level /System/Library/Perl/Extras/5.10.0 .) at -e line 1.
BEGIN failed--compilation aborted at -e line 1.
Perl/Tk version: 
Need to download Perl/Tk:
decoding snarf...
decoding air-counter...
decoding air...
decoding icons...
decoding tailer...
decoding split...
Download of Tk-804.028_502.tar.gz failed...

Come ti anticipavo prima però il package Tk-804.028_502.tar.gz l'ho installato separatamente, con la speranza che il sistema lo riconoscesse!

[alb3!]

all'installer non interessa se il pacchetto l'hai già installato.

nella sua routine di esecuzione lui deve scaricare quei determinati pacchetti e installarli, probabilmente secondo sue specifiche ( directory, variabili di compilazione... )

anche dal file di log si capisce che ha problemi a scaricare quel pacchetto....

hai altri download attivi, magari pesanti, mentre cerchi di installare ?

[peppespe]

all'installer non interessa se il pacchetto l'hai già installato.

nella sua routine di esecuzione lui deve scaricare quei determinati pacchetti e installarli, probabilmente secondo sue specifiche ( directory, variabili di compilazione... )

anche dal file di log si capisce che ha problemi a scaricare quel pacchetto....

hai altri download attivi, magari pesanti, mentre cerchi di installare ?

No assolutamente non sto scaricando alcunché!