Vai al contenuto

Upgrade Processore Mac Pro


Messaggi raccomandati

Ciao a tutti,

 stavo valutando acquisto di un Mac Pro senza dovermi svenare. In giro ormai si trovano dei 5,1 (mid 2010) con doppio processore a 2.4 Ghz (totale 8 core), 16Gb, ATI 5770, 4TB HD a 2000 euro. Voglio il 5,1 per velocità bus e perchè a wifi integrato più altre piccole finezze.

 

In rete con 1000 euro si possono comprare 2 intel Xeon a 6-core a 2,66Ghz (quindi aggiornare il MAC Pro a 12-core). E' un'operazione fattibile oppure il socket del processore che monta Apple è proprietario? Cosa devo guardare per essere sicuro che il processore che compro monti sulla scheda?

 

Grazie,

Davide.

 

Link al commento
Condividi su altri siti

si lo so, OWC offre il servizio ma significa mandare la scheda processori in US e poi ti chiedono un sacco di soldi (il doppio rispetto ai 1000 euro di cui sopra) e se non sbaglio si tengono pure i tuoi vecchi processori...

 

quindi volevo sapere che caratteristiche devono avere i processori Xeon 6-core per compatbilità MAC Pro e se poi tramite un bel cacciavite posso fare io upgrade :)

Link al commento
Condividi su altri siti

credo che riguardo quello che ti serve possa esserti utile quanto sotto, anche se si riferisce ad un macpro con singolo processore, penso che i cacciaviti e cavolate varie siano le stesse.

fonte:

http://www.xlr8yourmac.com/archives/apr11/042011.html#2010macproCPUupgrade

 

"2010 Mac Pro (5,1) Single Cpu Quad-Core 2.8GHz W3530 (8MB cache)
- Upgraded to 6-core 3.2GHz Xeon W3670 (12MB cache)

First off this is a very cost effective upgrade big bang for the buck. A 2010 Mac Pro quad 2.8GHz gets about 9950 score with geekbench 64 bit. The same Mac Pro with an Intel hex (6-core) 3.2GHz (w3670) now gets a 15260 64-bit geekbench score. More then 50% improvement.
This CPU came out Early March 2011: Intel Xeon Processor W3670 (12MB Cache, 3.20 GHz, 4.80 GT/s Intel QPI) with SPEC Code(s) SLBVE. This is the spec link. This can be found for about 600 to 660 from real resellers. I.E. Good warranty/return etc.
Here is the Link for the original CPU: Intel Xeon Processor W3530 (8MB Cache, 2.80 GHz, 4.80 GT/s Intel QPI) with SPEC Code(s) SLBKR

Some observations:
You need a hexagon 3 mm (Allen) key wrench about 20 cm long. I used a set from amazon. (As mentioned in earlier reports, you can often find the long (t-handle) 3mm hex wrench at hardware stores (ACE, etc) for under $5.) You also need a Cpu heat sink paste/grease kit. I used the Arctic Silver 5 kit also from amazon. These parts total appx $25 so I got free shipping.

This is an easy upgrade. The links (below) show in detail how to do it and the time is under 35 minutes. I have never done a cpu swap and I did it in well under an hour. 
The beauty of this upgrade is no overclocking, no heatsink change. The CPU is easy to get to. (2010/2009 Mac Pro CPU(s) are on a removable tray)

A (up to) 50 percent improvement in speed is amazing. If you sell the old CPU your cost will be about 400 dollars. If you want to bring the machine back to stock hold on to the cpu and 35 minutes later it is stock.

I use iStats (iStat Menus?) to check CPU temp - Cpu uses same power.
(FYI - unless it's been changed (I've not used v3), as I noted during 2009 Mac Pro core temp tests, iStat menus (v2) only reported CPU Heatsink temperature - not the (higher temp) core(s) or cpu temperature diode. I wrote iStat dev back in Dec 2009 about that but have not used istat since then. I preferred (freeware) Temperature Monitor.-Mike)
It truly is a bargain cpu. Intel lists it at $583 per 1000 pieces. I paid $620 with free shipping before some discounts.

Link al commento
Condividi su altri siti

E' un'operazione fattibile oppure il socket del processore che monta Apple è proprietario? Cosa devo guardare per essere sicuro che il processore che compro monti sulla scheda?

Prova, con un po' di pazienza, a dare un'occhiata a questo forum:

http://forums.macrumors.com/forumdisplay.php?f=1

Ammetto di non essermi interessato particolarmente all'upgrade di macchine a doppio processore ma di sfuggita ho letto qualche discussione al riguardo. A differenza della macchina a singolo processore sembra che la doppia richieda di mettere mano ai processori rimuovendone il coperchio. Onestamente non mi è chiara la faccenda ma non è un operazione da fare a cuor leggero anche se sembra che parecchi l'abbiano fatto senza problemi.

Link al commento
Condividi su altri siti

Archiviato

Questa discussione è archiviata e chiusa a future risposte.

×
×
  • Crea Nuovo...