andreaitaly Inviato 25 Luglio 2021 Segnala Condividi Inviato 25 Luglio 2021 Ciao, come da titolo vorrei sapere perché il mio HD esterno da 2tb, anche se lo inizializzo alla fine del processo la sua capacità è di 3 giga. Ho prato parecchi test ma non ho riscontrato errori, ho usato anche drivedx e mi ha detto che è tutto ok. Copio e incollo i risultati del test ### SYSTEM INFORMATION ### Report Timestamp : 25 luglio 2021 20:16:48 CEST Report Timestamp (ISO 8601 format) : 2021-07-25T20:16:48 Application Name : DriveDx Application Version : 1.11.0.730 Application SubBuild : 0 Application Edition : Standalone Application Website : https://binaryfruit.com/drivedx DriveDx Knowledge Base Revision : 101/101 Computer Name : iMac de Andrea Host Name : iMac-de-Andrea Computer Model : iMac17,1 OS Boot Time : 2021-07-25T20:09:43 Time Since Boot : 00h 07m 05s OS Name : macOS OS Version : 10.16.0 OS Build : 20G71 OS Kernel Version : Darwin 20.6.0 SAT SMART Driver Version : 0.10.3s ATA Command Support Tolerance : verypermissive N of drives in report : 1 ### DRIVE 1 OF 1 ### Last Checked : 25 luglio 2021 20:14:33 CEST Last Checked (ISO 8601 format) : 2021-07-25T20:14:33 Advanced SMART Status : OK Overall Health Rating : GOOD 100% Overall Performance Rating : GOOD 100% Issues found : 0 Serial Number : 28OFTFZPT WWN Id : 0 000000 000000000 Volumes : hd esterno, UNTITLED Device Path : /dev/disk3 Total Capacity : 2.0 TB (2.000.398.934.016 Bytes) Model Family : Toshiba 2.5" HDD MQ04UBD... Model : TOSHIBA MQ04UBD200 Form Factor : 2.5 inches Firmware Version : JT000U Drive Type : HDD 5400 rpm Power On Time : 18.429 hours (25 months 17 days 21 hours) Power Cycles Count : 212 Current Power Cycle Time : 0.1 hours === DEVICE CAPABILITIES === S.M.A.R.T. support enabled : yes DriveDx Active Diagnostic Config : Base config [hdd.default] Sector Logical Size : 512 Sector Physical Size : 4096 Physical Interconnect : USB Logical Protocol : USB Removable : yes Ejectable : no ATA Version : ACS-3 T13/2161-D revision 5 SATA Version : SATA 3.3, 3.0 Gb/s (current: 3.0 Gb/s) I/O Path : IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/XHC1@14/XHC1@14000000/SSP1@14700000/External USB 3.0@14700000/IOUSBHostInterface@0/IOUSBMassStorageInterfaceNub/IOUSBMassStorageDriverNub/IOUSBMassStorageDriver/IOSCSILogicalUnitNub@0/fi_dungeon_driver_IOSATDriver/IOSATServices Enclosure Vendor Id / Product Id : 0x480 / 0x900 SAT Pass Through Mode : sat12 SAT SMART Driver Version : 0.10.3s SAT SMART Driver Bundle Id : com.binaryfruit.driver.SATSMARTDriver SAT SMART Driver I/O Class : fi_dungeon_driver_IOSATDriver SAT SMART Driver Architectures : x86_64 arm Attributes Data Structure Revision : 16 SMART Command Transport (SCT) flags : 0x3d SCT Status supported : yes SCT Feature Control supported : yes SCT Data Table supported : yes Error logging capabilities : 0x1 Self-tests supported : yes Offline Data Collection capabilities : 0x5b Offline Data Collection status : 0x0 Auto Offline Data Collection flags : 0x0 [Known device ]: yes [Drive State Flags ]: 0x0 === CURRENT POWER CYCLE STATISTICS === Time since computer startup : 0 hours Data Read : 812.544 bytes (812.5 KB) Data Written : 11.264 bytes (11.3 KB) Data Read/Write Ratio : 72.14 Data Read/hour : 6.9 MB/hour Data Write/hour : 95.4 KB/hour Operations (Read) : 121 Read IOPS : 72 Operations (Write) : 6 Write IOPS : 4 Operations Read/Write Ratio : 20 Throughput per operation (Read) : 6.7 KB/Op Throughput per operation (Write) : 1.9 KB/Op Latency Time (Read) : 0 ns Latency Time (Write) : 0 ns Retries (Read) : 0 Retries (Write) : 0 Errors (Read) : 0 Errors (Write) : 0 === PROBLEMS SUMMARY === Failed Indicators (life-span / pre-fail) : 0 (0 / 0) Failing Indicators (life-span / pre-fail) : 0 (0 / 0) Warnings (life-span / pre-fail) : 0 (0 / 0) Recently failed Self-tests (Short / Full) : 0 (0 / 0) I/O Error Count : 0 (0 / 0) Time in Under temperature : 0 minutes Time in Over temperature : 0 minutes === IMPORTANT HEALTH INDICATORS === ID NAME RAW VALUE STATUS 5 Reallocated Sector Count 0 100% OK 197 Current Pending Sector Count 0 100% OK 198 Offline Uncorrectable Sector Count 0 100% OK 199 UDMA CRC Error Count 0 100% OK === TEMPERATURE INFORMATION (CELSIUS) === Current Temperature : 35 Power Cycle Min Temperature : 35 Power Cycle Max Temperature : 35 Lifetime Min Temperature : 15 Lifetime Max Temperature : 46 Recommended Min Temperature : 0 Recommended Max Temperature : 60 Temperature Min Limit : 0 Temperature Max Limit : 60 === DRIVE HEALTH INDICATORS === ID | NAME | TYPE | UPDATE | RAW VALUE | VALUE | THRESHOLD | WORST | LAST MODIFIED | STATUS 1 Raw Read Error Rate Pre-fail online 0x0 100 50 100 25/07/21 20:14 100% OK 2 Throughput Performance Pre-fail offline 0 100 50 100 25/07/21 20:14 100% OK 3 Spin Up Time Pre-fail online 2.238 100 1 100 25/07/21 20:14 100% OK 4 Start Stop Count Life-span online 22.562 100 0 100 25/07/21 20:14 100% OK 5 Reallocated Sector Count Pre-fail online 0 100 50 100 25/07/21 20:14 100% OK 7 Seek Error Rate Pre-fail online 0x0 100 50 100 25/07/21 20:14 100% OK 8 Seek Time Performance Pre-fail offline 0 100 50 100 25/07/21 20:14 100% OK 9 Power On Hours Life-span online 18.429 54 0 54 25/07/21 20:14 54.0% OK 10 Spin Retry Count Pre-fail online 0 253 30 100 25/07/21 20:14 100% OK 12 Power Cycle Count Life-span online 212 100 0 100 25/07/21 20:14 100% OK 191 G-Sense Error Rate Life-span online 13 100 0 100 25/07/21 20:14 100% OK 192 Power-Off Retract Count Life-span online 26 100 0 100 25/07/21 20:14 100% OK 193 Load Cycle Count Life-span online 73.130 93 0 93 25/07/21 20:14 93.0% OK 194 Temperature (Celsius) Life-span online 35 100 0 100 25/07/21 20:14 100% OK 196 Reallocated Event Count Life-span online 0 100 0 100 25/07/21 20:14 100% OK 197 Current Pending Sector Count Life-span online 0 100 0 100 25/07/21 20:14 100% OK 198 Offline Uncorrectable Sector Count Life-span offline 0 100 0 100 25/07/21 20:14 100% OK 199 UDMA CRC Error Count Life-span online 0 200 0 253 25/07/21 20:14 100% OK 220 Disk Shift Life-span online 0 100 0 100 25/07/21 20:14 100% OK 222 Loaded Hours Life-span online 1.299 97 0 97 25/07/21 20:14 97.0% OK 223 Load Retry Count Life-span online 0 100 0 100 25/07/21 20:14 100% OK 224 Load Friction Life-span online 0 100 0 100 25/07/21 20:14 100% OK 226 Load-in Time Life-span online 190 100 0 100 25/07/21 20:14 100% OK 240 Head Flying Hours Pre-fail offline 0 100 1 100 25/07/21 20:14 100% OK === DRIVE ERROR LOG === error log is empty === DRIVE SELF-TEST LOG === self-test log is empty Cita Link al commento Condividi su altri siti Altre opzioni di condivisione...
loudycloud Inviato 25 Luglio 2021 Segnala Condividi Inviato 25 Luglio 2021 1 ora fa, andreaitaly dice: Ciao, come da titolo vorrei sapere perché il mio HD esterno da 2tb, anche se lo inizializzo in che formato? Con che schema (MBR/HFS)? Cita Link al commento Condividi su altri siti Altre opzioni di condivisione...
J.T.Kirk Inviato 25 Luglio 2021 Segnala Condividi Inviato 25 Luglio 2021 (modificato) 5 ore fa, andreaitaly dice: Ciao, come da titolo vorrei sapere perché il mio HD esterno da 2tb, anche se lo inizializzo alla fine del processo la sua capacità è di 3 giga. Ho prato parecchi test ma non ho riscontrato errori, ho usato anche drivedx e mi ha detto che è tutto ok. Copio e incollo i risultati del test ### SYSTEM INFORMATION ### Report Timestamp : 25 luglio 2021 20:16:48 CEST Report Timestamp (ISO 8601 format) : 2021-07-25T20:16:48 Application Name : DriveDx Application Version : 1.11.0.730 Application SubBuild : 0 Application Edition : Standalone Application Website : https://binaryfruit.com/drivedx DriveDx Knowledge Base Revision : 101/101 Computer Name : iMac de Andrea Host Name : iMac-de-Andrea Computer Model : iMac17,1 OS Boot Time : 2021-07-25T20:09:43 Time Since Boot : 00h 07m 05s OS Name : macOS OS Version : 10.16.0 OS Build : 20G71 OS Kernel Version : Darwin 20.6.0 SAT SMART Driver Version : 0.10.3s ATA Command Support Tolerance : verypermissive N of drives in report : 1 ### DRIVE 1 OF 1 ### Last Checked : 25 luglio 2021 20:14:33 CEST Last Checked (ISO 8601 format) : 2021-07-25T20:14:33 Advanced SMART Status : OK Overall Health Rating : GOOD 100% Overall Performance Rating : GOOD 100% Issues found : 0 Serial Number : 28OFTFZPT WWN Id : 0 000000 000000000 Volumes : hd esterno, UNTITLED Device Path : /dev/disk3 Total Capacity : 2.0 TB (2.000.398.934.016 Bytes) Model Family : Toshiba 2.5" HDD MQ04UBD... Model : TOSHIBA MQ04UBD200 Form Factor : 2.5 inches Firmware Version : JT000U Drive Type : HDD 5400 rpm Power On Time : 18.429 hours (25 months 17 days 21 hours) Power Cycles Count : 212 Current Power Cycle Time : 0.1 hours === DEVICE CAPABILITIES === S.M.A.R.T. support enabled : yes DriveDx Active Diagnostic Config : Base config [hdd.default] Sector Logical Size : 512 Sector Physical Size : 4096 Physical Interconnect : USB Logical Protocol : USB Removable : yes Ejectable : no ATA Version : ACS-3 T13/2161-D revision 5 SATA Version : SATA 3.3, 3.0 Gb/s (current: 3.0 Gb/s) I/O Path : IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/XHC1@14/XHC1@14000000/SSP1@14700000/External USB 3.0@14700000/IOUSBHostInterface@0/IOUSBMassStorageInterfaceNub/IOUSBMassStorageDriverNub/IOUSBMassStorageDriver/IOSCSILogicalUnitNub@0/fi_dungeon_driver_IOSATDriver/IOSATServices Enclosure Vendor Id / Product Id : 0x480 / 0x900 SAT Pass Through Mode : sat12 SAT SMART Driver Version : 0.10.3s SAT SMART Driver Bundle Id : com.binaryfruit.driver.SATSMARTDriver SAT SMART Driver I/O Class : fi_dungeon_driver_IOSATDriver SAT SMART Driver Architectures : x86_64 arm Attributes Data Structure Revision : 16 SMART Command Transport (SCT) flags : 0x3d SCT Status supported : yes SCT Feature Control supported : yes SCT Data Table supported : yes Error logging capabilities : 0x1 Self-tests supported : yes Offline Data Collection capabilities : 0x5b Offline Data Collection status : 0x0 Auto Offline Data Collection flags : 0x0 [Known device ]: yes [Drive State Flags ]: 0x0 === CURRENT POWER CYCLE STATISTICS === Time since computer startup : 0 hours Data Read : 812.544 bytes (812.5 KB) Data Written : 11.264 bytes (11.3 KB) Data Read/Write Ratio : 72.14 Data Read/hour : 6.9 MB/hour Data Write/hour : 95.4 KB/hour Operations (Read) : 121 Read IOPS : 72 Operations (Write) : 6 Write IOPS : 4 Operations Read/Write Ratio : 20 Throughput per operation (Read) : 6.7 KB/Op Throughput per operation (Write) : 1.9 KB/Op Latency Time (Read) : 0 ns Latency Time (Write) : 0 ns Retries (Read) : 0 Retries (Write) : 0 Errors (Read) : 0 Errors (Write) : 0 === PROBLEMS SUMMARY === Failed Indicators (life-span / pre-fail) : 0 (0 / 0) Failing Indicators (life-span / pre-fail) : 0 (0 / 0) Warnings (life-span / pre-fail) : 0 (0 / 0) Recently failed Self-tests (Short / Full) : 0 (0 / 0) I/O Error Count : 0 (0 / 0) Time in Under temperature : 0 minutes Time in Over temperature : 0 minutes === IMPORTANT HEALTH INDICATORS === ID NAME RAW VALUE STATUS 5 Reallocated Sector Count 0 100% OK 197 Current Pending Sector Count 0 100% OK 198 Offline Uncorrectable Sector Count 0 100% OK 199 UDMA CRC Error Count 0 100% OK === TEMPERATURE INFORMATION (CELSIUS) === Current Temperature : 35 Power Cycle Min Temperature : 35 Power Cycle Max Temperature : 35 Lifetime Min Temperature : 15 Lifetime Max Temperature : 46 Recommended Min Temperature : 0 Recommended Max Temperature : 60 Temperature Min Limit : 0 Temperature Max Limit : 60 === DRIVE HEALTH INDICATORS === ID | NAME | TYPE | UPDATE | RAW VALUE | VALUE | THRESHOLD | WORST | LAST MODIFIED | STATUS 1 Raw Read Error Rate Pre-fail online 0x0 100 50 100 25/07/21 20:14 100% OK 2 Throughput Performance Pre-fail offline 0 100 50 100 25/07/21 20:14 100% OK 3 Spin Up Time Pre-fail online 2.238 100 1 100 25/07/21 20:14 100% OK 4 Start Stop Count Life-span online 22.562 100 0 100 25/07/21 20:14 100% OK 5 Reallocated Sector Count Pre-fail online 0 100 50 100 25/07/21 20:14 100% OK 7 Seek Error Rate Pre-fail online 0x0 100 50 100 25/07/21 20:14 100% OK 8 Seek Time Performance Pre-fail offline 0 100 50 100 25/07/21 20:14 100% OK 9 Power On Hours Life-span online 18.429 54 0 54 25/07/21 20:14 54.0% OK 10 Spin Retry Count Pre-fail online 0 253 30 100 25/07/21 20:14 100% OK 12 Power Cycle Count Life-span online 212 100 0 100 25/07/21 20:14 100% OK 191 G-Sense Error Rate Life-span online 13 100 0 100 25/07/21 20:14 100% OK 192 Power-Off Retract Count Life-span online 26 100 0 100 25/07/21 20:14 100% OK 193 Load Cycle Count Life-span online 73.130 93 0 93 25/07/21 20:14 93.0% OK 194 Temperature (Celsius) Life-span online 35 100 0 100 25/07/21 20:14 100% OK 196 Reallocated Event Count Life-span online 0 100 0 100 25/07/21 20:14 100% OK 197 Current Pending Sector Count Life-span online 0 100 0 100 25/07/21 20:14 100% OK 198 Offline Uncorrectable Sector Count Life-span offline 0 100 0 100 25/07/21 20:14 100% OK 199 UDMA CRC Error Count Life-span online 0 200 0 253 25/07/21 20:14 100% OK 220 Disk Shift Life-span online 0 100 0 100 25/07/21 20:14 100% OK 222 Loaded Hours Life-span online 1.299 97 0 97 25/07/21 20:14 97.0% OK 223 Load Retry Count Life-span online 0 100 0 100 25/07/21 20:14 100% OK 224 Load Friction Life-span online 0 100 0 100 25/07/21 20:14 100% OK 226 Load-in Time Life-span online 190 100 0 100 25/07/21 20:14 100% OK 240 Head Flying Hours Pre-fail offline 0 100 1 100 25/07/21 20:14 100% OK === DRIVE ERROR LOG === error log is empty === DRIVE SELF-TEST LOG === self-test log is empty Messo come codice si legge meglio. Apri Terminale e copia/incolla questo comando, con l'hd collegato e premi invio. (riporta il risultato non come quote ma come Codice <>) diskutil list Modificato 25 Luglio 2021 da J.T.Kirk Cita "Le menti non sono vasi da riempire ma fuochi da accendere" - Plutarco Link al commento Condividi su altri siti Altre opzioni di condivisione...
andreaitaly Inviato 26 Luglio 2021 Autore Segnala Condividi Inviato 26 Luglio 2021 grazie per la risposta, /dev/disk0 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *24.0 GB disk0 1: EFI EFI 314.6 MB disk0s1 2: Apple_APFS Container disk2 23.7 GB disk0s2 /dev/disk1 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *1.0 TB disk1 1: EFI EFI 209.7 MB disk1s1 2: Apple_APFS Container disk2 1000.0 GB disk1s2 /dev/disk2 (synthesized): #: TYPE NAME SIZE IDENTIFIER 0: APFS Container Scheme - +1.0 TB disk2 Physical Stores disk0s2, disk1s2 1: APFS Volume MacintoshHD - Dati 402.9 GB disk2s1 2: APFS Volume Preboot 414.6 MB disk2s2 3: APFS Volume Recovery 623.3 MB disk2s3 4: APFS Volume VM 2.1 GB disk2s4 5: APFS Volume MacintoshHD 15.3 GB disk2s5 6: APFS Snapshot com.apple.os.update-... 15.3 GB disk2s5s1 /dev/disk3 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *2.0 TB disk3 1: Apple_HFS hd esterno 2.7 GB disk3s1 2: EFI ESP 5.1 MB disk3s2 3: Microsoft Basic Data UNTITLED 307.2 KB disk3s3 Cita Link al commento Condividi su altri siti Altre opzioni di condivisione...
J.T.Kirk Inviato 26 Luglio 2021 Segnala Condividi Inviato 26 Luglio 2021 (modificato) Inizializzalo con Utility Disco. https://support.apple.com/it-it/guide/disk-utility/dskutl14079/mac Se desideri inizializzare un qualsiasi altro tipo di dispositivo di archiviazione: fai doppio clic su “Utility Disco” nella cartella /Applicazioni/Utility. Scegli Vista > Mostra tutti i dispositivi. Dalla barra laterale, seleziona il Dispositivo di archiviazione da inizializzare, quindi fai clic sul pulsante Inizializza . Fai clic sul menu a comparsa Schema, quindi scegli “Mappa delle partizioni GUID”. Fai clic sul menu a comparsa Formato, quindi scegli un formato di file system. Inserisci un nome. N.B. Devi selezionare il Disco non un volume interno al disco. Non Macintosh Hd ma il dispositivo "Toshiba MQ04....". Modificato 26 Luglio 2021 da J.T.Kirk Cita "Le menti non sono vasi da riempire ma fuochi da accendere" - Plutarco Link al commento Condividi su altri siti Altre opzioni di condivisione...
andreaitaly Inviato 26 Luglio 2021 Autore Segnala Condividi Inviato 26 Luglio 2021 grazie 1000! ho risolto!!! gentilissimo! buona serata Cita Link al commento Condividi su altri siti Altre opzioni di condivisione...
Messaggi raccomandati
Partecipa alla conversazione
Puoi pubblicare ora e registrarti più tardi. Se hai un account, accedi ora per pubblicarlo con il tuo account.